Miniature linear guideway
Miniature linear guideway
Miniature linear guideway are the smallest type of linear guide rails.
They utilize rolling friction, reducing the coefficient of friction to 1/50th that of sliding guide rails. This results in smooth movement, reduced impact and vibration, and micron-level positioning accuracy.
They are widely used in electronic equipment, precision instruments, automation equipment, medical devices, and semiconductor manufacturing.
Featuring ultra compact size, light weight, precision and interchangeable blocks available in certain precision grades.
Miniature size: 2 mm
Salt spray test time : 6 times
Product Details
Miniature Linear Guideway also called MG series Linear Guideway
Features of MGN Series Linear Guideway
Design features of narrow type miniature quideways- MGN:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy
3. Specification with ball retainers would avoid ball falling when the blocks are removed from rails.
4. Interchangeable types are available in certain sizes and precision grades.
Miniature Linear Guideway Application
Printing machines
Industrial robots
Electronic equipments
Semiconductor equipment
Selection and Maintenance
Selection Points: Choose the size based on the installation space and load requirements (e.g., 5mm width is suitable for lightweight instruments, 8-10mm for stronger load-bearing capacity).
Maintenance Notes: Guide rails of 15mm and above have grease fittings; others require lubrication through the grease hole. Keep the dustproof system clean to extend lifes.
Relatd Products
What Our Customers Said?
FAQ
Yeah, we have some standard in stock. Including Ball screw with nut, linear guide rail and block, linear module, linear motor and servo motor.
Yes, we can manfacture ballscrew according to customers’ size details drawing or specification, and please offer us below details
1, Ballscrew diameter
2, Thread lead
3, Thread lenght and total ballscrew length
4, End journal configuration
5, Nut configuration
6, Accuracy(lead deviation, geometrical tolerance)
7, Working speed
8, Maximum static load, working load, preload drag torque)
9, Nut safety requirement
10, Lubrication
Usually 45 working delivery days for C5 and P5 accuracy ball screw, but for C7-C10 ballscrew just need 15 working days.
From 50W to 1500W.
We have our own brand, but also we offer HIWIN, Delta, Leadshine, Mitsubishi and others famous brand motor.
Yes, but you need inform us details requirement we need, then our engineer can help you design.
Standard parts: 7-15days.
Non-standard parts: 15-25days.
We will make the delivery as soon as possible with the guarantee quality.
By T/T, for samples 100% with the order; over US $10000, 30% paid for deposit by T/T before production arrangement, the balance to be paid before shipment.
Yes, we can receive.
